Mouse Polling Rate Test Online

Start the mouse polling rate test, choose a 10s or 30s sample, then move your mouse continuously inside the test area. The tool measures the time between movement events and reports median Hz, peak Hz, distribution, and stability. If you expect 1000Hz but repeatedly see about 125Hz, check your mouse software, USB port, wireless mode, power saving settings, or browser.

Common mouse polling rates are 125Hz for basic or Bluetooth mice, 500Hz for many gaming settings, and 1000Hz for most modern gaming mice. Some newer mice support 2000Hz, 4000Hz, or 8000Hz, but browser event handling may under-report very high rates. For most players, a stable 1000Hz reading is the practical target.

If you're seeing ~125Hz when expecting higher, check these common causes: Your mouse might be set to a lower polling rate in its software. USB power saving settings can throttle polling. Using a USB hub instead of a direct connection can limit rates. Some USB 2.0 ports don't support higher polling rates. Wireless mice may have lower rates when in power-saving mode. Check your mouse software and Windows power settings.

Browser-based polling tests measure the rate at which mouse movement events reach your browser, which closely correlates with actual polling rate for most scenarios. However, browser event handling, system load, and compositor vsync can introduce some variance. For lab-grade precision measurement, manufacturer tools or hardware USB analyzers are more accurate. Our test is excellent for quickly spotting obvious issues like being stuck at 125Hz.

Yes, higher polling rates reduce the time between mouse movement and cursor update. At 125Hz, maximum latency is 8ms; at 1000Hz, it's only 1ms. For competitive gaming, this difference is noticeable. However, the benefits diminish above 1000Hz for most users, and extremely high polling rates (4000Hz+) can increase CPU usage. Most gamers find 1000Hz to be the sweet spot for performance and efficiency.

Yes, but minimally on modern systems. At 1000Hz, the mouse sends 1000 interrupts per second to the CPU. At 8000Hz, it sends 8000. On a modern CPU with many cores, this overhead is usually negligible, often under 0.1% CPU usage. Older CPUs or busy systems may show marginally higher CPU usage at 8000Hz. If you notice performance issues with an 8KHz mouse, switching to 4000Hz or 2000Hz usually removes the overhead while keeping most of the latency benefit.

For most gamers, the benefit over 1000Hz is very small. The latency improvement from 1ms to 0.125ms is below the threshold of human perception in most gaming scenarios. However, the smoother cursor tracking and reduced micro-jitter are measurable with high-speed cameras and can be detected by highly skilled competitive players. If you already have a 1000Hz setup optimized with a fast monitor and low input lag, 8000Hz is a marginal upgrade. If your current setup has other bottlenecks (60Hz monitor, high input lag), addressing those first will yield much larger improvements.

Yes, most gaming mice allow polling rate adjustment through their companion software such as Razer Synapse, Logitech G Hub, or SteelSeries GG. The available rates depend on your mouse model; common options are 125, 250, 500, and 1000Hz. Some premium mice add 2000, 4000, or 8000Hz options. Budget mice may be fixed at 125Hz with no software option. After changing the rate in software, rerun this test to confirm the new rate is active.

Modern 2.4GHz wireless gaming mice can match wired polling rates, and many now support 1000Hz wirelessly. Some premium receivers also support 4000Hz or 8000Hz. Older or budget wireless mice may be limited to 125Hz or 500Hz. Bluetooth mice are generally limited to lower effective polling rates, so 2.4GHz wireless is recommended for competitive gaming.